Acrylic has better aging resistance, which is better than other plastics. Acrylic has excellent surface strength and gloss, and can be made into a variety of products. It is lightweight, high quality and inexpensive. It has become a selection of many people's products, but acrylic is also a difference between advantages and disadvantages, which immediately determines its use period, and which acrylic raw materials to choose has become a headache problem for many advertising planning, and the following will share some tips for choosing acrylic raw materials!

1. Light transmittance identification

After the good acrylic plate is directly illuminated with white light, the light source displayed is very authentic, there is no yellowing or blue, and the good plate has higher light transmission. The surface of pure new acrylic board is authentic in tone, and the surface of the reconstructed board is yellow.

2. Thin and thick identification

One of the key characteristics of acrylic sheet is to consider the thickness of the thin, generally speaking, how thick is enough thickness, the purchase must ask clear thickness, this is the primary condition. Pure new acrylic board has excellent surface strength and scratch resistance, and there is no irritating smell during laser cutting; The surface of the reconstructed board is very easy to scratch, causing a harsh smell when laser cutting.

3. Fire roasting identification

Good acrylic is not suitable for ignition, and it is not easy to cause a pungent taste in the production and processing situation. There are many counterfeit raw materials on the sales market, and this can be tried with some people's said waste. When pure new acrylic sheet is heated for hot forming, it is not easy to cause bubbles and deformation; When the reformed board is heated by hot forming, it is very easy to have bubble deformation.

4. Identification of roasted soft

Good acrylic acrylic luminescent word board can be separated even if it is pasted together after baking soft, while poor materials are very difficult to separate after baking soft. Pure new acrylic sheet has a long adaptability to paint and ink; Remanufactured boards are sensitive to paint and ink, and are very easy to cause silver grains or cracks.

5. Soft rubber edge identification

New boards and good raw materials are packaged with soft rubber edges in the factory, in order to better prevent friction. Therefore, this can be used as a way to differentiate between recycling raw materials and new boards.

6. Quality identification

Good plate manufacturers will generally give samples and specific goods, you can check and review according to the color and some main parameters, and it is easy to identify.